9975 Series Bareco Weld on Ball Ends

The 9975 Series Bareco weld-on ball ends are replacement ball joint sockets for tractor top links and lower link arms. When a top link or lower link end fails — typically from impact damage or fatigue cracking — replacing the entire arm is expensive and often unnecessary. A weld-on ball end lets the operator cut off the damaged end and weld in a new one, restoring the original geometry at a fraction of the cost.

The round weld-in type ball ends are also supplied to manufacturers building tractor tow bars and custom hitch assemblies — providing a standard ball pivot for trailer drawbars and similar applications.

Sizes and types

• B-310 — Cat 1 top link ball end, 19mm
• B-311 — Cat 2 top link ball end, 25.4mm
• B-328 — Cat 1 lower link ball end, 22mm
• B-329 — Cat 2 lower link ball end, 28.6mm
• B-2461 / B-2462 / B-2463 / B-6690 — Weld-in round type, 22mm / 25.4mm / 28.6mm / 38mm

For complete top link assemblies, see our 9975 Series Bareco top link range (Cat 0/1/2 standard and heavy duty Cat 2/3).

Order before 11am and we dispatch the same business day. We ship Australia-wide, including rural and regional areas — delivery times vary by location and carrier.

Free delivery on orders over $200. Orders under $200 incur a flat $20 shipping charge.

Ordering Bareco parts urgently, or shipping to a remote location? Call us on 1300 027 886 before you order and we'll confirm dispatch time frames.

All products come with guarantees that cannot be excluded under the Australian Consumer Law. You're entitled to a replacement or refund for a major failure, and to compensation for any other reasonably foreseeable loss or damage. You're also entitled to have goods repaired or replaced if they fail to be of acceptable quality, where the failure isn't major.

For any warranty or product fault enquiry, contact us on 1300 027 886 or sales@uniclamp.com.au with your order details.