Bareco Heavy Duty Drawbars are designed for use with the three-point linkage on agricultural tractors. The drawbar connects to the lower link arms to stabilise the linkage when towing implements, trailers, or bale feeders, preventing the link arms from swinging laterally under load.

Available Models

• B-121: Category 1 drawbar (22mm pin diameter)
• B-124: Category 2 drawbar (28.6mm pin diameter)

Selecting the Right Category

Category 1 linkage is standard on tractors up to approximately 50HP. Category 2 is used on mid-to-larger tractors typically from 50HP upward. If you are unsure of your tractor's linkage category, measure the pin holes on your lower link arms: 22mm holes indicate Category 1, 28.6mm holes indicate Category 2.

Applications

• Towing trailers, carts, and grain bins
• Stabilising the three-point linkage during transport
• Towing farm implements where the category 1 or 2 pin is required

Both models are heavy duty construction, suited to the loads placed on farm tractor linkages during everyday agricultural work. Part of the 9975 Series. Bareco has been supplying tractor parts and agricultural equipment to Australian farmers since 1944.