7750 Series Standard Spring Loaded T Bolt Clamps W3 Packs of 10

The 7750 Series spring loaded T bolt clamps are W3 stainless clamps with a coil spring  on the bolt, designed to maintain constant clamping load on turbocharger, intercooler and charge air connections as the silicone hose and metal pipework expand and contract through the heat cycle.

Standard rigid T bolt clamps lose tension as silicone hose softens at temperature and as the system heats and cools — the coil spring on the 7750 Series compresses and releases to take up that movement, keeping the joint sealed and preventing the boost leaks that plague performance and modified diesel applications. Sizes 63-72mm to 216-224mm cover most charge air piping.

Available sizes (packs of 10)

• 12 sizes from TBS-321 (63-72mm) to TBS-355 (216-224mm)
• Full size range available in the variant menu
• W3 stainless band with coil spring
• Suits silicone, EPDM and reinforced charge air hose

For non-spring T bolt clamps in lower-temperature applications, see the 7700 Series. For constant tension worm-drive clamps in cooling and breather lines, refer to the 8100 Series with integrated spring.

Order before 11am and we dispatch the same business day. We ship Australia-wide, including rural and regional areas — delivery times vary by location and carrier.

Free delivery on orders over $200. Orders under $200 incur a flat $20 shipping charge.

Ordering Bareco parts urgently, or shipping to a remote location? Call us on 1300 027 886 before you order and we'll confirm dispatch time frames.

All products come with guarantees that cannot be excluded under the Australian Consumer Law. You're entitled to a replacement or refund for a major failure, and to compensation for any other reasonably foreseeable loss or damage. You're also entitled to have goods repaired or replaced if they fail to be of acceptable quality, where the failure isn't major.

For any warranty or product fault enquiry, contact us on 1300 027 886 or sales@uniclamp.com.au with your order details.