A fast reference guide for 9985 Series Bareco P.T.O. Drive Shafts from 16HP to 195HP

Use this page to identify the correct Bareco PTO drive shaft for your tractor and implement. All standard shafts use 1 3/8" quick-release 6-spline yokes at both ends, except the P700 Series which uses 1 3/4" x 20 spline. Freight is included to any Australian address.

For guidance on measuring shaft length, understanding HP ratings, and selecting safety clutch options, see the complete PTO shaft selection guide.

Bareco PTO drive shaft range

• Series 1 — AB1075 — 16HP — length 94–127cm, triangular tubing — $198
• Series 2 — AB2060 — 21HP — length 97–130cm, triangular tubing — $220
• Series 4 — AB4105 — 35HP — length 122–182cm, triangular tubing — $265
• Series 6 — AB6105 — 64HP — length 125–180cm, triangular tubing — $335
• Series 8 — AB8105 — 106HP — length 130–180cm, triangular tubing — $440
• W2500 Series — AW36105 — 110HP/540RPM, 176HP/1000RPM — length 130–185cm, star profile — $525
• W2600 Series — AW26105 — 120HP/540RPM, 192HP/1000RPM — length 125–185cm, star profile — $850
• P700 Series — AP713020 — 195HP/540RPM, 297HP/1000RPM — 1.6m fixed, star profile, 1 3/4" x 20 spline — $1,795

Triangular profile tubing is used up to 106HP (Series 8). Star profile begins at 110HP. Safety clutch versions, wide-angle CV shafts, long-reach variants, and Howard-specific configurations are also available — see the full product guide or contact us.

Order before 11am and we dispatch the same business day. We ship Australia-wide, including rural and regional areas — delivery times vary by location and carrier.

Free delivery on orders over $200. Orders under $200 incur a flat $20 shipping charge.

Ordering Bareco parts urgently, or shipping to a remote location? Call us on 1300 027 886 before you order and we'll confirm dispatch time frames.

All products come with guarantees that cannot be excluded under the Australian Consumer Law. You're entitled to a replacement or refund for a major failure, and to compensation for any other reasonably foreseeable loss or damage. You're also entitled to have goods repaired or replaced if they fail to be of acceptable quality, where the failure isn't major.

For any warranty or product fault enquiry, contact us on 1300 027 886 or sales@uniclamp.com.au with your order details.